REDCON 2.4G 6CH Microlite DSM2 Compatible

REDCON 2.4G 6CH Microlite DSM2, cocok untuk remote seperti OrangeRX, DX6I, DX7, DX8, DSX7, DSX9, DSX11, dan lain-lain yang memiliki modulasi DSM2.

Lebih detail


Rp 125.000

Stock : Tersedia

0.01 Kg

DSN2RD

Poin Belanja Dengan membeli produk ini Anda mendapatkan 1250 poin belanja. Total poin dari belanja anda akan menjadi 1250 poin yang dapat dikonversi menjadi Voucher sebesar Rp 1.250.


REDCON 2.4G 6CH Microlite DSM2, cocok untuk remote seperti OrangeRX, DX6I, DX7, DX8, DSX7, DSX9, DSX11, dan lain-lain yang memiliki modulasi DSM2.

 

Description:
Brand Name: REDCON
Item Name: CM621 receiver
Band: 2.4GHz
Channel: 6
Modulation: DSM2
Dimensions (W x Lx H): 19 x40x9mm
Weight: 4.4g
Voltage Range: 4-10v
Brown-Out Voltage: 4.0v (Always supply power above this voltage)
Antenna Length Main RX: 30mm
Expected Range: 400m (tested with JR DSX9)
Compatibility (Spektrum and JR DSM2): DX6I,DX7,DX8 DSX7,DSX9 DSX11

Features:
Patent pending Model Match prevents flying a model using the wrong model memory (feature does not work with module systems).
Servo Sync (feature does not work with module systems)
Preset failsafe system.
Quick Connect
Horizontal-Pin configuration
Red LED indicates number of hold

Binding Procedure:
1. Put the binding harness into connector location marked BATT. Next apply power to the receiver. Receiver LED should illuminate it means bind is accomplished
2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.
3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now.
4. Remove binding harness from the BATT channel. Restart the receiver by cycling it power off and turn on and connect battery into BATT channel is recommended. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.

Tidak ada pelanggan komentar untuk saat ini.

Hanya pengguna terdaftar dapat memposting komentar baru.

12 produk lainnya dalam kategori yang sama:

Troli  

Belum ada produk yang dibeli.

Berat :
Ongkos Kirim Rp 0
Total Rp 0

Troli Selesai

Produk Baru

Semua produk baru

Bantuan

User Online

Pengunjung Online: 1
Akses Hari ini: 16
Total Akses: 151201
IP Anda: 54.158.248.112